Bi-puller System
For use on badly damaged quarter panels, back panels, sills, front wings and other damaged areas. Most dented areas can be repaired if you have the correct tools.

The Bi-puller is used with the AP95, the WS20 and the InvertaSpot range of welders.

· Fit the wavy wire using the AP95 or single sided gun.

· Fit the magnetic clamp in the best place.

· The Bi-puller claw can be used on straight panels or on curved areas.

· The 4 kilo hammer can pull out most dents.

· So simple and so effective.

For more information and to register for updates by email, please click here.